• Gossen Metrawatt
  • Gossen
  • Camille Bauer

SSP 62N 80RU 12,5P

Thank you

Item number: K341A

Lab Power Supplies Programmable, Power: 500 W, Voltage: 0 to 80 V, Current: to 1.5 A

  • k345a-konst_ssp1000-52_front_07248a.jpg
  • k345a-konst_ssp1000-52_persp1_07246a.jpg
  • k345a-konst_ssp1000-52_persp2_07247a.jpg

KONSTANTER SSP-500, 1000, 2000 and 3000 (Single-Output System Power Supplies)are single output, programable and computer controlled laboratory power supplies for universal use in R&D, production and testing.

Special circuitry allows for jumping from 0 V to nominal voltage (and back again) under nominal load conditions within response times of less than 10 ms.

The analog interface provides for monitor and auxiliary outputs, as well as programmable trigger and setpoint inputs.

  • Technical characteristics
    • Wide range of functions, minimal power loss
    • Auto-ranging output with 500, 1000, 2000 or 3000 W
    • Voltage and current regulated output
    • Increased output power for brief intermittent periods
    • Very short response times thanks to special circuitry
    • Dynamic sink mode operation
    • Excellent dynamic control parameters
    • Minimal residual ripple
    • Output ON/OFF function
    • Lockable control elements
    • Sequence controls for the generation of voltage and current sequences
    • Master-slave operation with parallel or series connection
    • Protection against overvoltage, overcurrent and excessive temperature
    • Analog interface
    • Output terminals at rear panel


    • RS 232 and IEEE 488 interfaces (with measurement value querying)
    • Driver software for LabVIEW, LabWindows and HP VEE

    • Designation SSP 500-80
    • Power (W) 500
    • Voltage (V) 0-80
    • Current (A) 0-12.5
    • Type 62 N 80 RU 12.5 P


Download Center

In our Download Center you will find all documentations from the product area in English.

More Topics


If you have questions about the product, need technical information or the current delivery time? Our sales department will be happy to help you!

Sales Support

Telephone: 732-287-3680

Send message


Under myGMC you can register your product, and receive up-to-date information on firmware updates, standard changes and much more.