• Gossen Metrawatt
  • Gossen
  • Camille Bauer

SIRAX BT5400

Thank you

Item number: 175316

Measuring Transducer for Power, Power Factor and Phase Angle, RS485, LCD Display

  • bt5400-sirax-bt5400_front_16643.jpg
  • bt5400-sirax-bt5400_persp1_16644.jpg

The SIRAX BT5400 is used to measure and convert active, apparent, reactive power, phase angle & power factor of a single phase or 3-phase AC system with balanced or unbalanced load into an proportional DC current or voltage output signal.

  • Technical characteristics
    • Connection type: One-phase, 3-phase 3-wire balanced or unbalanced load or 3-phase 4-wire balanced or unbalanced load
    • Measuring input for power
    • Nominal voltage up to 500 V, nominal current 1 / 5 A
    • 2 configurable analog outputs linear or kinked in a unipolar range of 0...20 mA / 4...20 mA or 0...10 V or a
    • bipolar range of -20...0 mA or -10...0...+10 V
    • Quick on-site programming using push buttons or via CB-Configurator software
    • Simple on-site device operation
    • Clear and well readable representation of measured data via LCD display
    • Flexible communication and remote readout via integrated Modbus RTU interface
    • DIN rail for top-hat rail mounting

Download Center

In our Download Center you will find all documentations from the product area in English.

More Topics

Contact

If you have questions about the product, need technical information or the current delivery time? Our sales department will be happy to help you!

Sales Support
Sales

Telephone: 732-287-3680

Send message

myGMC

Under myGMC you can register your product, and receive up-to-date information on firmware updates, standard changes and much more.