The resolution depends on the set current and voltage transformers and thus independent of the actual measured variable.
Here is an overview:
Voltage indication depends on primary outer conductor voltage
| Primary Phase Voltage | Display | Dimension via interface |
||
|---|---|---|---|---|
| > 60 kV > 6 kV 700 V 100 V |
...750 kV ...60 kV ...6 kV ...600 V |
xxx.x kV xx.xx kV xxxx V xxx.x V |
dim.U = | 2 1 0 -1 |
Current indication depending on the primary current
| Primary Current | Display | Dimension via interface |
||
|---|---|---|---|---|
| > 60 kA > 6 kA > 600 A 65 A 10 A 1 A |
...150 kA ...60 kA ...6 kA ...600 A ...60 A ...5 A |
xxx.x kA xx.xx kA xxxx A xxx.x A xx.xx A x.xxx A |
dim.I = | 2 1 0 -1 -2 -3 |
Power and energy indication dependent on Product of
primary line voltage and primary current
| Primary Performance (Energy) |
Display | Dimension via interface |
||
|---|---|---|---|---|
| > 36 GW > 3.6 GW > 360 MW > 36 MW > 3.6 MW > 360 kW > 36 kW > 3.6 kW 400 W 100 W |
... 112.5 GW ... 36 GW ... 3.6 GW ... 360 MW ... 36 MW ... 3.6 MW ... 360 kW ... 36 kW ... 3.6 kW ... 300 W |
xxx.x MkW xx.xx MkW xxxx MW xxx.x MW xx.xx MW xxxx kW xxx.x kW xx.xx kW xxxx W xxx.x W |
dim.P = | 8 7 6 5 4 3 2 1 0 -1 |