POWER ON with defined setting (SETUP)
POWER ON with defined setting (SETUP) If the device, regardless of how the current operating state was before switching off, should always report with a defined setting after "POWER ON", this can be specified via a selected SETUP memory location (eg "05"). The prerequisite is then that the parameter "POWER_ON R05" is entered at the switch-off time. For preparation, the desired switch-on configuration including all parameters is set and transferred to the SETUP MEMORY as usual with "SAVE 5" or the command "* SAV 5". It should be noted that "POWER_ON R05" must also belong to the parameter set to be stored!